Permatex Professional Strength Rearview Mirror Adhesive permanently remounts mirrors to windshields.
- Rearview Mirror Adhesive
- Permanently re-mounts mirrors to windshields
- Approved and used by GM, Ford and Chrysler
- 2 Part Kit
Air Restricted State Restrictions: AK, HI and PR Canada Restricted Hazardous
| Brand | Permatex |
| Part Number | 81844 |
| Product Line | Rearview Mirror Professional Strength Adhesive |
| Activator Included | Yes |
| Activator Container | Tube |
| Activator Volume | 0.02 oz |
| Adhesive Included | Yes |
| Adhesive Container | Tube |
| Adhesive Volume | 0.01 oz |
| Quantity | Kit |
Automobile
Suggested Applications: Mounting rearview mirrors to windshields.
Instructions
- Remove mounting button from mirror bracket.
- Mark outside of windshield with crayon to identify old location of mirror button.
- Thoroughly scrape windshield glass and button to remove all old adhesive.
- Open Cleaner/Activator Towelette by pulling both sides of protective packet at the point at top of package. Fold packet back to use. Towelette is attached to packet.
- Clean marked area on inside of windshield with Cleaner/Activator Towelette. Allow to dry for 2 minutes or until completely dry. DO NOT TOUCH windshield after priming.
- Tear open adhesive pouch at the top. Apply one drop to the center of the button.
- Immediately apply the button to the windshield, ensuring that the correct side is facing up, and hold firmly in place for 1 minute. Allow to set for 15 minutes. Mount mirror to button. If button is mounted incorrectly, bond another button over the original one.
- Solvents, heat and leverage are not recommended for removal.
- Repair at temperatures between 50°-75°F (10°-24°C).
- Not recommended for plastic buttons.
No products in the cart.