The Bell tradition of building high-quality open-face helmets with classic styling inspired by the original Bell 500 TX lives on in the Sport Mag. Designed for racers who enjoy the feel of an open-face helmet, the Sport Mag delivers value and quality at an affordable price.
- Composite shell
- Open face
- Advanced multi-density, multi-piece liner to maximize energy absorption and impact performance
- M6 terminals for FHR anchor attachment and homologated for use with approved head and neck devices
- Visor peak with anti-glare strip
- Sizes: Small, Medium, Large, XL, 2XL, 3XL and 4XL
- Homologation: Snell SA2020
Includes:
- Sport Mag
- Visor Peak Installed
- Draw String Helmet Bag
- Hex Wrench Key
| Product Line | Sport Mag |
| Open/Closed Face | Open |
| Fresh Air | No |
| Vent System | No |
| Snell Rating | SA 2020 |
| Head and Neck Support Ready | Yes |
| Visor Included | Yes |
| Graphics | No |
| Bag Included | Yes |
| Material | Carbon Composite |
| Color | Black or White |
| Finish | Paint |
| Quantity | Each |
Available Sizes and Colors:
| MPN | Size | Color |
| 1426A01 | Small | White |
| 1426A02 | Medium | White |
| 1426A03 | Large | White |
| 1426A04 | XL | White |
| 1426A05 | 2XL | White |
| 1426A06 | 3XL | White |
| 1426A07 | 4XL | White |
| 1426A11 | Small | Flat Black |
| 1426A12 | Medium | Flat Black |
| 1426A13 | Large | Flat Black |
| 1426A14 | XL | Flat Black |
| 1426A15 | 2XL | Flat Black |
| 1426A16 | 3XL | Flat Black |
Bell Helmet Size Chart
| Size | Hat Size | Inches | Centimeters |
|---|---|---|---|
| 4XS | 6 3/8 | 20 1/16 | 51 |
| 3XS | 6 1/2 – 6 5/8 | 20 1/2 – 20 7/8 | 52-53 |
| 2XS | 6 3/4 – 6 7/8 | 21 1/2 – 21 5/8 | 54-55 |
| XS | 7 | 22 | 56 |
| S | 7 1/8 | 22 3/8 | 57 |
| M | 7 1/4 – 7 3/8 | 22 3/4 – 23 1/4 | 58-59 |
| L | 7 1/2 | 23 5/8 | 60 |
| XL | 7 5/8 – 7 3/4 | 24 – 24 3/8 | 61-62 |
| 2XL | 7 7/8 – 8 | 24 3/4 – 25 1/4 | 63-64 |
| 3XL | 8 1/8 – 8 1/4 | 25 5/8 – 26 | 65-66 |
| 4XL | 8 3/8 – 8 1/2 | 26 3/8 – 26 3/4 | 67-68 |
Fitting your Bell Helmet
Proper helmet fit is vital to the performance of a helmet during an impact. For maximum protection the helmet must fit properly with the chin strap securely fastened and provide adequate peripheral vision.
Measuring the head is only a starting point for the entire sizing procedure. Due to varying shapes, heads that are apparently the same size when measured by a tape may not necessarily fit the same size helmet. A small metal tape measure or a cloth tape may be used to make your initial measurement. You can also use a string, which can then be laid against a measuring tape.
The circumference of the head should be measured at a point approximately one inch above the eyebrows in front, and at a point in the back of the head that results in the largest possible measurement. Take several measurements. The largest measurement is the one you want to try on first. If you use a balaclava or head sock, always measure and fit the helmet with it on. Use the Bell sizing chart to determine the size that best matches the head measurement.
