The Bell GTX.3 helmet features a lightweight carbon composite shell and sleek aero styling. The front chin bar gurney and integrated rear wing enhance aerodynamic performance at higher speeds. The integrated shield, double screen anti fog (DSAF) visor and rear facing vents allow air exchange and clear vision while preventing dust from entering the helmet (especially on dirt tracks or other demanding racing environments). The versatile GTX.3 provides industry-leading performance, professional features and is an ideal choice for racers competing in open wheel, open compartment, formula, karting and dirt tracks.
- Lightweight carbon composite shell
- High-pressure molding system for improved shell strength
- Sleek aerodynamic styling with integrated wing Venturi airflow system allows air exchange while preventing dust and dirt from entering the helmet
- Front Chin Bar Gurney (Duckbill) for Improved aerodynamic performance
- Hollow synthetic rubber gasket seal ensuring that air, water and dirt can’t penetrate into the helmet
- Multi-piece, multi-density high-impact custom bead absorbing liner for low and high velocity impact protection
- Integrated channels in the face piece offer multiple options to install integrated drinking tube systems and radio communications (microphone and speakers)
- Ultra plush grey Comfort-Max flame retardant interior fabric for improved comfort and superior moisture wicking properties
- Pro-style, multi foam density interior with contoured cheek pads
- Standard size eye port
- SE03 3MM DSAF Shield (SV SE03/05 Pivot System) – Clear Shield
- Double Screen Anti-Fog (DSAF) Visor Insert
- Homologation: SA2020 and FIA8859
- M6 terminal hardware for Head and Neck Restraints
- Includes draw-string helmet bag
- Hex wrench included
- Sizes 7 1/8 to 7 5/8 Plus
- Available in Gloss White and Matte Black
| Product Line | GTX3 |
| Open/Closed Face | Closed |
| Fresh Air | No |
| Vent System | Yes |
| Snell Rating | SA 2020 |
| FIA Approved | Yes |
| Head and Neck Support Ready | Yes |
| Shield Included | Yes |
| Shield Color | Clear |
| Visor Included | No |
| Wicker Bill Included | Yes |
| Graphics | No |
| Bag Included | Yes |
| Material | Carbon Composite |
| Color | Gloss White or Matte Black |
| Finish | Paint |
| Quantity | Each |
| Keywords | GTX 3, GTX-3, GTX.3, GTX3 |
Available Sizes and Colors
| MPN | Size | Color |
| 1314A01 | 7-1/8 (57 cm) | Gloss White |
| 1314A02 | 7-1/4 (58 cm) | Gloss White |
| 1314A03 | 7-3/8 (59 cm) | Gloss White |
| 1314A04 | 7-1/2 (60 cm) | Gloss White |
| 1314A05 | 7-5/8 (61 cm) | Gloss White |
| 1314A06 | 7-5/8+ (61+ cm) | Gloss White |
| 1314A11 | 7-1/8 (57 cm) | Flat Black |
| 1314A12 | 7-1/4 (58 cm) | Flat Black |
| 1314A13 | 7-3/8 (59 cm) | Flat Black |
| 1314A14 | 7-1/2 (60 cm) | Flat Black |
| 1314A15 | 7-5/8 (61 cm) | Flat Black |
| 1314A16 | 7-5/8+ (61+ cm) | Flat Black |
Bell Helmet Size Chart
| Standard Size | Hat Size | Inches | Centimeters |
|---|---|---|---|
| 4XS | 6 3/8 | 20 1/16 | 51 |
| 3XS | 6 1/2 – 6 5/8 | 20 1/2 – 20 7/8 | 52-53 |
| 2XS | 6 3/4 – 6 7/8 | 21 1/2 – 21 5/8 | 54-55 |
| XS | 7 | 22 | 56 |
| S | 7 1/8 | 22 3/8 | 57 |
| M | 7 1/4 – 7 3/8 | 22 3/4 – 23 1/4 | 58-59 |
| L | 7 1/2 | 23 5/8 | 60 |
| XL | 7 5/8 – 7 3/4 | 24 – 24 3/8 | 61-62 |
| 2XL | 7 7/8 – 8 | 24 3/4 – 25 1/4 | 63-64 |
| 3XL | 8 1/8 – 8 1/4 | 25 5/8 – 26 | 65-66 |
| 4XL | 8 3/8 – 8 1/2 | 26 3/8 – 26 3/4 | 67-68 |
Fitting your Bell Helmet
Proper helmet fit is vital to the performance of a helmet during an impact. For maximum protection the helmet must fit properly with the chin strap securely fastened and provide adequate peripheral vision.
Measuring the head is only a starting point for the entire sizing procedure. Due to varying shapes, heads that are apparently the same size when measured by a tape may not necessarily fit the same size helmet. A small metal tape measure or a cloth tape may be used to make your initial measurement. You can also use a string, which can then be laid against a measuring tape.
The circumference of the head should be measured at a point approximately one inch above the eyebrows in front, and at a point in the back of the head that results in the largest possible measurement. Take several measurements. The largest measurement is the one you want to try on first. If you use a balaclava or head sock, always measure and fit the helmet with it on. Use the Bell sizing chart to determine the size that best matches the head measurement.
